CAUTION
Always check that the rope is
attached correctly and has a
stop-knot on the other end of
the rope. Failure to attach the
rope correctly could result in
damage to the rope and loss
of grip on the rope.
Load the rope when the
Emergency Stop of the Ascender
is activated to avoid accidental
activation by the Remote Control.
Ensure that the Rope Cover
is locked into position.
Loaded rope Unloaded rope
4. Feed the rope through the slot
in the Rope Guide. Tighten the
rope a little. The rope will be
pulled into the Rope Grab and
the Rope Cover can be closed
more easily.
5. Close the Rope Cover and
ensure it is locked. The Rope
Cover lock should snap into
its position. A distinct ‘click’
should be heard. Never attempt
to close the Rope Cover with force.
45
To Next Page
Loading...
