ACU-RITE PRO+ 06014 - User Manual

Need help?

Do you have a question about the ACU-RITE PRO+ 06014 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes the AcuRite 5-in-1 PRO+ Weather Sensor, model 06014, an outdoor weather monitoring device designed to provide accurate environmental measurements.

Function Description

The 5-in-1 PRO+ Weather Sensor is a comprehensive outdoor unit that measures rainfall, wind speed, wind direction, temperature, and humidity. It is designed to operate continuously outdoors, converting sunlight into power for its internal aspirating fan to ensure accurate temperature readings by reducing solar radiation heating. The sensor transmits data wirelessly to a companion display unit (not included), which must be synchronized using a matching A-B-C switch setting.

Important Technical Specifications

Temperature Range: Outdoor: -40°F to 158°F (-40°C to 70°C)
Humidity Range: Outdoor: 1% to 99%
Wind Speed: 0 to 99 mph; 0 to 159 kph; 0 to 86 knots
Wind Direction Indicators: 16 points
Rainfall: 0.01 inches (0.25 mm) and up
Wireless Range: 330 ft / 100 m (depending on home construction materials)
Operating Frequency: 433 MHz
Power: 4 x AA alkaline or lithium batteries. Lithium batteries are recommended for temperatures below -4°F (-20°C) as alkaline batteries may function improperly in cold conditions.
Data Reporting:
- Wind Speed: 18 second updates
- Wind Direction: 30 second updates
- Outdoor temperature & humidity: 36 second updates

Usage Features

5-in-1 Sensor Components:
- Rainfall Collector Funnel: Gathers rainwater for measurement.
- Solar Cell Panel: Powers the internal aspirating fan, which draws ambient air into the sensor to reduce solar radiation heating, ensuring more accurate temperature readings.
- A-B-C Switch: An ID code switch (A, B, or C) located in the battery compartment that must match the companion display unit's switch for synchronization.
- Battery Compartment: Houses 4 AA batteries.
- Temperature & Humidity Sensors: Internal sensors for environmental monitoring.
- Mounting Point: For attaching the sensor to a bracket or pole.
- Wind Speed Anemometer: Measures wind speed.
- Wind Direction Vane: Determines wind direction.
- Mounting Bracket: Included for installation.
- Mounting Hardware: Includes 5 anchors and various screws (#4 diameter, 3/4" length; #4 diameter, 1/2" length; #6 diameter, 1/2" length).
- Debris Filter: Pre-installed in the rain gauge to prevent debris from entering.
Installation Guidelines:
- Installation Height: Mount at a minimum height of 5 feet (1.5 meters) off the ground in an open area. For optimal wind measurements, the National Weather Service recommends 33 feet (10 meters).
- Mounting Options: The included bracket can be screwed onto wooden posts or surfaces (2"x 4" or larger) or directly mounted to a 3/4" steel pipe.
- Solar Cell Orientation: Install the sensor with the solar cell facing SOUTH to maximize sun exposure and correctly orient wind direction.
- Leveling: Ensure the sensor is perfectly level using its built-in bubble level for accurate rainfall measurements.
- Placement for Maximum Accuracy:
  - Wireless Range: Maintain a distance of 330 feet (100 meters) between the sensor and display. Avoid large metallic items, thick walls, and metal surfaces that can limit wireless communication.
  - Wireless Interference: Place units at least 3 feet (0.9 meters) away from electronic devices (TVs, computers, microwaves, radios).
  - Heat Sources: Position away from heaters, air conditioners, chimneys, exhaust vents, asphalt, and concrete.
  - Humidity Sources: Avoid pools, spas, or other bodies of water.
  - Sprinkler Heads: Do not install where it will be sprayed by a sprinkler system.
  - Wind & Rain Obstructions: Mount in a wide open area with few structures to ensure accurate wind and rain measurements.

Maintenance Features

Battery Replacement: Batteries MUST be installed for operation. AcuRite recommends high-quality alkaline or lithium batteries. Heavy-duty or rechargeable batteries are not recommended. Follow polarity diagrams and dispose of used batteries properly.
Rain Gauge Stabilizer Removal: A plastic tab taped to the bottom of the sensor must be removed for the rain gauge to function correctly.
Rain Gauge Calibration:
1. Ensure the sensor is level.
2. Monitor rainfall with a companion unit or AcuRite software.
3. Create a pinhole in a plastic cup, hold it over the rain gauge, and fill with exactly 1 cup (8oz) of water, allowing it to drip slowly (over 20 minutes) into the rain gauge.
4. The companion unit should register approximately 0.01" increments after each bucket tip, totaling 1.06" when the cup is empty.
5. If the reading is not close to 1.06", adjust the two calibration screws on the bottom of the sensor equally. Turning screws clockwise increases rainfall, counter-clockwise decreases rainfall.
  - 1/8 turn = 2% adjustment
  - 1/4 turn = 4% adjustment
  - 1/2 turn = 8% adjustment
6. Ensure an equal number of water drops (about 25) between bucket tips; adjust calibration screws if unequal.
Product Registration: Register online at www.AcuRite.com to receive 1 year warranty protection.
Customer Support: Contact AcuRite Customer Support at (877) 221-1252 or visit www.AcuRite.com for installation videos, replacement parts, user forum, and to submit feedback.