▲▼
When your choice is set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.
To exit ELAPSED TIME RESET
without changing the current setting,
select EXIT by pressing the INFO
( / ) button, then press the SEL/
RESET button. The screen goes
back to CUSTOMIZE MENU.
If you choice is not set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY. If this
happens, you need to repeat the
elapsed time reset setup.
Multi-Information Display
Instruments and Controls
99
To Next Page
Loading...
