▲▼
▲▼
While the multi-information display
is in the ACC SETUP of the
CUSTOMIZE GROUP, press the
SEL/RESET button. The screen
changes to CUSTOMIZE MENU.
Press the INFO ( / ) button until
you see the above display.
Press the SEL/RESET button. The
screen changes as shown above. The
highlighted unit, mph or km/h, is
the current setting. To change the
setting, press the INFO ( / )
button until the unit you want is
highlighted, then press the SEL/
RESET button.
To change the unit of measurement
from mph to km/h, do this:
CONTINUED
Multi-Information Display
Adaptive Cruise Control Display
Speed Unit
Instruments and Controls
89
To Next Page
Loading...
Need help?
General
