▲▼
While the multi-information display
is in the LIGHTNING SETUP screen
of the CUSTOMIZE GROUP, press
the SEL/RESET button. The screen
changes to the above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select how long you want the lights
to stay on before they fade out (60,
30, or 15 seconds) by pressing the
INFO ( / ) button, then press the
SEL/RESET button to enter your
selection.
The interior lights fade out when you
close all doors and the trunk. To
change how long the lights stay on
before they fade out, follow these
instructions:
CONTINUED
Multi-Information Display
Interior Light Dimming Time
Instruments and Controls
113
To Next Page
Loading...
