Push the ACC button on the
steering wheel. The ACC indicator
on the instrument panel comes on,
and ‘‘ACC’’ is shown on the multi-
information display.
Accelerate to the desired speed
above25mph(40km/h).
Press and release the DECEL/
SET button on the steering wheel.
If you press the DECEL/SET button
when the vehicle speed is below 25
mph (40 km/h), you will hear three
beeps. This means ACC is not
activated, and you cannot set your
speed.
When your speed reaches 25 mph
(40 km/h), ACC goes into wait mode,
and ‘‘ACC STANDBY’’ is shown on
the multi-information display.
1.
2.
3.
CONTINUED
Adaptive Cruise Control (ACC)
Using the ACC
242
ACC BUTTON
DECEL/SET BUTTON
To Next Page
Loading...
