CONTINUED
Turn the ignition ON (II). Set the
Climate control system to 90°F
(32°C). Turn the ignition off.
Openthehood.Makesurethe
engine and radiator are cool to the
touch.
Remove the radiator cap.
Loosen the drain plug on the
bottom of the radiator. The
coolant will drain through the
splash guard.
Thecoolingsystemshouldbe
completely drained and refilled with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
Honda All Season Antifreeze/
Coolant Type 2. Use of any non-
Honda coolant or plain water can
result in corrosion and deposits in
the cooling system.
Draining the coolant requires access
to the underside of the vehicle.
Unless you have the tools and
knowledge, you should have this
maintenance done by a skilled
mechanic.
1. 3.
2.
Replacing Engine Coolant
Cooling System
Maintenance
313
DRAIN PLUG
０２／０７／３１ １４：０７：３９ ３１Ｓ３Ｖ６２０ ０３１８
To Next Page
Loading...
Need help?
General
