Pull the center of the horizontal
switch up to raise the seat. Push it
down to lower the seat.
Adjust the seat-back angle by
pushing the rear switch in the
direction you want to move.
Vary the lumbar support by moving
the lever on the right side of the
seat-back. Move the lever forward or
backward to adjust the lumbar
support through its full range.
Driver’s Lumbar Support
Seats
Instruments and Controls
102
０２／０７／３０ ２１：３９：１８ ３１Ｓ３Ｖ６２０ ０１０７
To Next Page
Loading...
