Fig. 22: Connecting VTEC Solenoid Valve 2P Connector Terminal No. 1 To Body Ground With A
Jumper Wire
12. Check for continuity between ECM/PCM connector terminal B6 and body ground.
Is there continuity?
YES: Go to step 20 .
NO: Repair open in the wire between the ECM/PCM (B6) and the VTEC solenoid valve,
then go to step 14 .
2004 Acura TSX
2004 ENGINE PERFORMANCE VTEC/VTC - TSX
Wednesday, March 12, 2008 2:17:58 AM Page 34