Acura TSX 2004 User Manual

Fig. 23: Checking For Continuity Between ECM/PCM Connector Terminal B6 & Body
Ground
13. Replace the VTEC solenoid valve (see VTEC SOLENOID VALVE REMOVAL/INSTALLATION
).
14. Reconnect all connectors.
15. Turn the ignition switch ON (II).
16. Reset the ECM/PCM with the HDS.
17. Do the ECM/PCM idle learn procedure (see ECM/PCM IDLE LEARN PROCEDURE ).
18. Check for Temporary DTCs or DTCs in the DTCs MENU with the HDS.
Are any Temporary DTCs or DTCs indicated?
YES: If DTC P2649 is indicated, check for poor connections or loose terminals at the VTEC
solenoid valve and the ECM/PCM, then go to step 1 . If any other Temporary DTCs or DTCs
are indicated,
g
o to the indicated DTC troubleshootin
g
.
2004 Acura TSX
2004 ENGINE PERFORMANCE VTEC/VTC - TSX
Wednesday, March 12, 2008 2:17:58 AM Page 35

Acura TSX 2004 Specifications

General

Brand	Acura
Model	TSX 2004
Category	Automobile
Language	English