Fig. 6: Checking For Continuity Between ECM/PCM Connector Terminal B1 & Body
Ground
15. Replace the VTC oil control solenoid valve (see VTC OIL CONTROL SOLENOID VALVE
REMOVAL/TEST/INSTALLATION ).
16. Reconnect all connectors.
17. Turn the ignition switch ON (II).
18. Reset the ECM/PCM with the HDS.
19. Do the ECM/PCM idle learn procedure (see ECM/PCM IDLE LEARN PROCEDURE ).
20. Do the VTC TEST in the INSPECTION MENU with the HDS.
21. Check for Temporary DTCs or DTCs in the DTCs MENU with the HDS.
2004 Acura TSX
2004 ENGINE PERFORMANCE VTEC/VTC - TSX
Wednesday, March 12, 2008 2:17:58 AM Page 7