Acurus Muse - Speaker Layout Configuration; Speaker Layout Setup Interface

Acurus MUSE Immersive Processor USER GUIDE
Revision 20190227
Document 1000905
Overhead
Loudspeaker
Layout Selector
Audio Bed
Loudspeaker
Layout Selector
Speaker Layout
On this page, you can directly set the speaker layout in the
room. Audio bed loudspeakers, subwoofers and overhead
loudspeakers are grouped together and selectable as buttons.
Audio Bed Layout Selector: These buttons enable or disable
the audio bed (ear-level) loudspeakers. Left-right speaker
pairs are enabled and disabled in pairs.
Subwoofer Selector: These buttons enable or disable the
subwoofers.
Overhead Loudspeaker Layout Selector: These buttons enable
or disable the overhead loudspeaker configuration.
Layout Indicator: This indicator shows the resulting
loudspeaker layout from the audio bed, subwoofer and
overhead loudspeaker selections.
Forward Arrow to Loudspeaker Parameters Page: Touch this
arrow to adjust specific parameters for each loudspeaker.
Layout Indicator
Subwoofer Selector
To Loudspeaker Parameters Page
22