ACV HeatMaster 101 - Communication Mode (with Code); Fan Mode (with Code); Error Mode (with Code)

en
29
ENMCBA PArAMeters for the sPeCiAlist
660Y1400 - A
COMMUNICATION MODE with code :
This mode indicates communication between the boiler and the control module.
MODE Display STEP Display Parameter Description
No communication
Communication only between the boiler module and the optional control module.
Communication between all the connected appliances.
The interface kit and the programmable room thermostat are available as an option.
FAN MODE with code :
This mode indicates the current fan speed.
MODE Display STEP Display Parameter Description
FaN 5500
The current speed of the fan is 5,500 rpm.
ERROR MODE with code :
This mode indicates the most recent error, as well as the status of the boiler and the values at the time of this error.
MODE Display STEP Display Parameter Description
1 36
Error code at last lockout
2 00
Boiler status at the time of the error
3 00
T1 temperature at the time of the error
4 00
T2 temperature at the time of the error
5 00
Hot water temperature T3 at the time of the error
6 00
Outdoor temperature T4 at the time of the error