ADA MP-1 Owner’s manual
7.1 MIDI SPECIFICATIONS
SPECIFICATION 1.0, Rev 3.3
MIDI TIME CODE Recognized in Level 3 Software
CHANNEL 1 -16, OMNI, Off
PROGRAM CHANGE: External Programs: 1 -128. Internal Memory: 1-128, OUT
(bypass condition).
PARAMETER
CHANGE & DUMP: SYSTEM Exclusive.
7.2 SOFTWARE UPDATES
By sending in your warranty card, you are entitled to one free EPROM software update.
Thereafter, updates are $50.00 each. You can send your unit to ADA for installation or we
can send you the EPROM. Always Refer to qualified service personel for installation.
When you power-up the MP-1, the software revision level is indicated on the LED
Readout before the word "ADA" flashes.
Level 1 software offers the following features: 100% compatibility with MIDI Spec 1.0. In
addition, ADA has pioneered a phantom power system which sends AC power through a
7-pin MIDI cable to controllers such as ADA's MC-1 MIDI CONTROLLER.
Level 2 software offers upload and download of MP-1 parameters to computers with a
MIDI interface using system exclusive messages. In addition, MP-I parameters may be
accessed in real-time using SYSEX messages.
Level 3 software will read MIDI Time Code for synchronizing with SMPTE Time Code
devices. and will be able to store a Q-LIST of MTC program and parameter changes.
These are the updates that we now know about. As MIDI evolves, so will the M P-1 , its
capabilities will continue to expand!
Page 18 of 26
To Next Page
Loading...
Need help?
General
