ADA MP-1 Owner’s manual
SELECT MIDI CHANNEL:
1. Press MIDI CHNL button.
2. Use
^ V buttons to select MIDI channel from 1 thru 16, ALL (OMNI) or OFF (MIDI
reception off).
3. Press MIDI CHNL to save and exit.
DIRECTING MIDI PROGRAM CHANGE INFORMATION TO DIFFERENT INTERNAL
MEMORY NUMBERS:
1. Press PRGM button.
2. Select a MIDI program number by using the
^ V buttons to scroll thru MIDI program
numbers1 thru 128 or select directly using BANK and 0 thru 12.
3. Press MEM button.
4. Select an internal memory number by using the
^ V buttons to scroll thru the 1-128
memory numbers or select directly using BANK and 0 thru 9.
5. Press MEM to save the change and to exit.
LOAD PRESET PROGRAMS (1 thru 29)
1. Press STORE button. Press BANK, and while holding, press 1. Display shows
"LP".
1.2 FEATURES
Unique Tri-State Voicing option for choice of Clean Tube,
Distortion Tube, or Solid State circuit for each program.
Two low noise 12AX7 A/7025 tubes.
128 programs.
Three programmable gain controls for each program.
Four band programmable EQ including 16dB boost/cut for bass and treble.
Fully programmable stereo chorus and doubler.
Programmable effects loop with adjustable send/receive level.
Stereo headphone jack with level control.
Stereo outputs switchable from line level (to mixing board) to instrument level
(to guitar amp).
1/4" instrument level input jack on front panel for easy access.
Active balanced input on rear panel for mixing boards.
Output level knob for fast volume adjustment without affecting tone.
Programmable compression level in Solid State mode.
Received MIDI program numbers are re-assignable (mapable) to any MP-1
memory number.
MIDI In, Out and Thru.
Selectable MIDI channel including ALL channels (OMNI) and no channels
(OFF).
Lexan membrane switch front panel replaces pots. No contamination from
dust or liquids.
Optional MC-1 MIDI CONTROLLER footswitch provides instant access to any
program for on-stage control.
Self-diagnostics check unit during power up.
Instantaneous logic-controlled FET switching.
EPROM updates will be available for future system expansion.
State-of-the-art software implementation including SYSEX and MIDI Time
Code for computer controlled applications.
Simple programming routine.
One year parts and labor warranty. Extended 3 year warranty available.
Page 5 of 26
To Next Page
Loading...
Need help?
General
