Adaptec CDP-00277-01-A - Page 49

# Export-EsxImageProfile -ImageProfile "ESXi 5.0 Adaptec Series 7"
-FilePath C:\ESXi5.0-PMC-CustomISO\ESXi5.0-PMC-Sierra-Series-7.iso
-NoSignatureCheck -ExportToISO
where -FilePath species the path to the custom iso image.
7. Burn the custom ISO image to a writable CD.
Note: Use whatever tool you prefer to burn the CD, such as an interactive
(GUI-based) tool or a command line tool.
Remove the CD after you nish burning the image.
8. On the VMware ESXi machine, insert the custom boot CD, then restart your computer.
9. Follow the on-screen instructions to begin the VMware installation.
10. Complete the VMware installation, following the on-screen instructions.
11. Remove the custom boot CD, then reboot your computer.
49Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00277-01-A Rev. A, Issue:
Serial Attached SCSI RAID Controllers Installation and User's Guide