EasyManua.ls Logo

Adaptec CDP-00277-01-A - Installing on Vmware

Adaptec CDP-00277-01-A
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installing on VMware
Note: You must remove the old driver before you can install the new one. You must
have root privilege to install the new driver.
Note: To copy the driver VIB le to the VMware ESX/ESXi server (in Step 2 below),
you must have access to a remote copy utility, such as WinSCP, putty, or Linux scp.
To install the driver on VMware:
1. At the VMware console screen, type these commands to remove the old driver:
VMware ESX 4.1:
esxupdate query --vib-view | grep -i aacraid (list driver packages)
esxupdate -b <vibID> --maintenancemode remove (remove package)
where vibID is the full name of the driver package.
Note: For VMware 4.0 or earlier, use the rpm -e command to remove the driver.
VMware ESXi 5.0:
esxcli software vib list | grep -i aacraid (list driver packages)
esxcli software vib remove --vibname=scsi-aacraid --maintenance-mode (remove
package)
2. Using a remote copy utility, copy the driver VIB le for your operating system version from the Linux
driver folder on the installation DVD to a local directory on the ESX server. This example uses Linux
scp to copy the driver to /tmp/aacraid (where xxxxx is the build number):
VMware ESX 4.1:
scp
/mnt/cdrom/linux/driver/vmware-esx-drivers-scsi-aacraid-400.4.2.1.xxxxx-1.0.4.260247.x86_64.vib
root@<esx-server-ip>:/tmp/aacraid
VMware ESXi 5.0:
scp
/mnt/cdrom/linux/driver/vmware-esxi-drivers-scsi-aacraid-500.5.2.1.xxxxx.-1.0.5.472560.x86_64.vib
root@<esx-server-ip>:/tmp/aacraid
Note: Due to le name limits on the installation DVD, the “_64.vib” portion of the
le name may be truncated and not visible.
3. Install the VIB module (where xxxxx is the build number):
VMware ESX 4.1:
esxupdate -b
/tmp/aacraid/vmware-esx-drivers-scsi-aacraid-400.4.2.1.xxxxx-1.0.4.260247.x86_64.vib
--nodeps --nosigcheck --maintenancemode update
VMware ESXi 5.0:
esxcli software vib install -f -v
file:/tmp/aacraid/vmware-esxi-drivers-scsi-aacraid-500.5.2.1.xxxxx.-1.0.5.472560.x86_64.vib
4. Reboot your computer.
53Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00277-01-A Rev. A, Issue:
Serial Attached SCSI RAID Controllers Installation and User's Guide

Table of Contents

Related product manuals