Adaptive Beta-Brite 1024 - Appendixes; Appendix A - Modes, Fonts, and Colors Available on Signs

Remote Control Programming Manual
36 Appendixes: Appendix A — Modes, fonts, and colors available
Appendixes
Appendix A — Modes, fonts, and colors available
Modes determine the way text and graphics move on a sign. For
example, the ROTATE mode moves a message across a sign from right to
left. Fonts are the size and shape of text characters.
The letters in brackets — like [AUT] and [RED] — are what will
appear on the sign:
Modes available
• Automode — [AUT] — SHIFT + 7.
• Flash — [FLS] — SHIFT + 4.
• Hold — [HLD] — SHIFT + 5.
• Interlock — [SPC]3 — SPECIAL + 3.
• Roll — [RL↑] — SHIFT + 1. Use SELECT to change roll direction.
• Rotate — [ROT] or [CRT] — SHIFT + 6. Use SELECT to change
between the two.
• Scroll — [SCR] — SHIFT + 3.
• Slide — [SPC]5 — SPECIAL + 5.
• Snow — [SPC]2 — SPECIAL + 2.
• Sparkle — [SPC]1 — SPECIAL + 1.
• Spray — [SPC]6 — SPECIAL + 6.
• Starburst — [SPC]7 — SPECIAL + 7.
• Switch — [SPC]4 — SPECIAL + 4.
• Twinkle — [SPC]0 — SPECIAL + 0.
• Wipe — [WI↑] — SHIFT + 2. Use SELECT to change wipe direction.
Fonts available
All these fonts can also be displayed wider using WIDTH:
• 7-row sans serif — [SS7]
• 7-row serif — [SRF]
• 5-row sans serif — [SS5]