Press and
release
In about seven seconds,
cuff will begin to inflate
The unit will
turn on
Cuff pressure and pulse
detection is noted on the
display
When sufficient pressure is
reached, inflation stops
and cuff deflates
if MAM Average Mode is on, countdown to the second or
third reading will appear and the next reading will start.
1
If using the ADC@Home app, open the app on your phone or tablet be-
fore starting the measurement. For information on setting up the app,
see pages 14-15.
i
You’ll hear a slight pause when inflation nears 30 mmHg as
the inflation process calibrates for optimal comfort.
i
To Next Page
Loading...
Need help?
General
