4
Introduction and Intended Use
This manual covers the Advantage Connect
®
(6024N) and Advantage Connect
®
Plus (6025N) upper-arm automatic blood pressure monitors. To find the model
number of your device, see the rating label located on the bottom of the unit.
Your unit uses the oscillometric method to provide systolic pressure, diastolic
pressure, and pulse rate. Other features include AM/PM readings, average
mode, irregular heartbeat detection, and a Bluetooth radio to allow data to be
stored on a smart phone or tablet equipped with ADC@Home software. Blood
pressure readings are obtained during the inflation cycle (as the cuff pumps up),
which allows for a slightly faster and much more comfortable measurement pro-
cess.
The device accommodates two users, each with 99 reading memory, and offers
clinically proven accuracy with a user-friendly design.
Before getting started, please read this instruction manual carefully and
then keep it in a safe place. Additional documentation is available at
www.adctoday.com/ADCatHome. Please contact your doctor if you have
further questions about blood pressure and its measurement.
Contraindications
This device is contraindicated for any person who is connected to a wearable or
implantable electronic device or instrument, such as a pacemaker or defibrillator.
This blood pressure monitor is not intended to be a diagnostic device.
Contact your physician if hypertensive values are indicated.
WARNING: The device is not suitable for use on pregnant women; users with
implanted electric devices; users with preeclampsia, premature ventricular
beats, atrial fibrillation, or peripheral arterial disease; users undergoing intravas-
cular therapy or arteriovenous shunt; or people who received a mastec-
tomy. Consult with your physician prior to using this unit if you suffer from any
of these illnesses or conditions.
To Next Page
Loading...
Need help?
General
