ADC e-shpyg 3 - Setting 3 x Mode Intervals

Setting measurement interval times in « » Mode
The default measurement interval time is 60 seconds. The interval times can
be set as 15, 30, 45, or 60 seconds.
1) Press and hold the Start/Stop Button for three seconds.
2) Press the Memory Button to adjust the measurement interval time, then
press the Start/Stop Button to confirm. The device will go back to standby.
Push and hold for
3 seconds...
25
Interval times can be set to 15, 30, 45, or 60 seconds.
3x