ADC e-shpyg 3 - Viewing Stored Data; Accessing 1 x Mode Readings; Accessing 3 x Mode Readings

Viewing the stored values
The device stores blood pressure values of the last measurement procedure in
«1x» and « » Mode. Press the Memory Button to review the stored readings
when the device is in standby mode.
In «1x» Mode
In « » Mode
Press the Memory Button to reveal the average of the triple measurements.
Continue pressing the Memory Button to review individual measurements.
The device stores only the last measurement completed in «1x » Mode and the
last three measurements completed in « » Mode.
26
Stored values are erased when the unit is powered off.
3x
3x
3x