What to do if ADCMT 823B Measuring Instruments displays OL?
If the ADCMT Measuring Instruments displays 'OL', it indicates that the input power is too high or the input value exceeds the maximum value set in the specified manual range. Try reducing the input power. Alternatively, if the manual range is set, change to the automatic range.
Why does the display remain unchanged on my ADCMT Measuring Instruments?
If the display of your ADCMT Measuring Instruments remains unchanged, it could be because the HOLD or MAX function is enabled. To resolve this, disable the HOLD function or disable the MAX function.
What does Err3 mean on ADCMT Measuring Instruments?
If 'Err3' is displayed on the ADCMT Measuring Instruments, it indicates an issue with the sensor. This could be due to a sensor calibration data sum check error, a sensor calibration data read error, or an incompatible sensor being connected. Try reconnecting the sensor, ensuring it is compatible, and then turn the power on.
What does Lo mean on ADCMT 823B Measuring Instruments?
If 'Lo' is displayed on the ADCMT Measuring Instruments, it means the input power is too low in dBm mode. If the manual range is set, change it to the automatic range.
What to do if ADCMT 823B Measuring Instruments displays Err2?
If 'Err2' is displayed on your ADCMT Measuring Instruments, it means the sensor is disconnected. To fix this, connect the sensor.
How to enable key operation on ADCMT 823B Measuring Instruments?
If the key operation is disabled on your ADCMT Measuring Instruments, it is likely because the key lock is set to ON. To enable key operation, set the key lock to OFF.
General| Brand | ADCMT |
|---|---|
| Model | 823B Series |
| Category | Measuring Instruments |
| Language | English |
To Next Page
