Need help?Do you have a question about the ADCMT 6244 and is the answer not in the manual?
General| Model | 6244 |
|---|---|
| Interfaces | GPIB, RS-232C |
| Display | LCD |
| Category | Measuring Instruments |
| Accuracy (Current) | ±0.05% |
| Test Signal Level | 0.01 Vrms to 1 Vrms, 1 μArms to 20 mArms |
Details on product safety warnings and their meanings for hazard identification.
Essential safety guidelines to prevent fire, electric shock, and personal injury during operation.
Instructions for performing an initial operational check to verify correct instrument function.
Information on the necessity and procedure for annual instrument calibration.
Provides an overview of the front and rear panel components and their functions.
Detailed description of the keys, connectors, and indicators on the instrument's front panel.
Covers fundamental operations for setting source/limiter values and navigating menus.
Explains methods for setting source and limiter values using cursors or direct input.
Guides users through menu navigation and parameter configuration using keys and data knobs.
Describes basic methods for performing DC voltage and current measurements using the instrument.
Details how to perform measurements using the instrument's pulse generation capabilities.
Explains procedures for conducting measurements using various sweep modes.
Details how the LIMIT key toggles between source value and limiter value setting modes.
Guides users through accessing parameter groups and setting parameters via the MENU key.
Describes parameters related to sweep source modes, including sweep type and values.
Explains how to properly connect the Device Under Test (DUT) to the instrument.
Explains how to operate the instrument in the DC Source mode, including timing and status changes.
Details the operational procedures for the Pulse Source mode, covering various timing and trigger conditions.
Explains the functionality and operation of the instrument's sweep modes.
Describes staircase sweep types, including linear, log, and reverse modes.
Details the pulse sweep types, covering linear, log, and reverse modes.
Explains operations and restrictions related to source functions like mode and polarity.
Guides on changing the source mode and function, and how it affects values.
Covers selection of measurement functions and ranging options.
Explains how to select between voltage and current measurement functions.
Details the types of measurement ranging and their operations in DC and Pulse modes.
Describes the function of voltage and current limiters to prevent device damage.
Lists the ranges for setting voltage and current limiters in relation to source values.
Details the instrument's alarm functions for detecting errors and preventing damage.
Provides an overview of GPIB interface usage for remote control.
Compares functional differences between TR6143 and Original modes for key features.
Outlines the procedures for testing the performance of the 6243 model.
Lists the specific measuring instruments for conducting performance tests.
Details the step-by-step methods for executing performance tests on the 6243.
Describes tests for self-check, display, buttons, buzzer, and external signals.
Outlines the procedures for testing the performance of the 6244 model.
Lists the necessary measuring instruments for conducting performance tests.
Details the step-by-step methods for executing performance tests on the 6244.
Step-by-step procedure for testing voltage source measurement accuracy.
Procedure for testing current source measurement accuracy across various ranges.
Procedure for testing current source measurement accuracy in high current ranges.
Provides instructions for calibrating the 6243 model to ensure specified accuracy.
Lists the specific cables and measuring instruments needed for 6243 calibration.
Outlines essential safety precautions to follow during the calibration process.
Details the necessary connections using the 6581 and standard resistors for calibration.
Specifies the calibration points and acceptable tolerance ranges for accurate calibration.
Provides a step-by-step guide for performing the calibration process for the 6243 model.
Explains how to initialize calibration data back to default values.
Provides instructions for calibrating the 6244 model to ensure specified accuracy.
Lists the specific cables and measuring instruments needed for 6244 calibration.
Outlines essential safety precautions to follow during the calibration process.
Details the necessary connections using the 6581 and standard resistors for calibration.
Specifies the calibration points and acceptable tolerance ranges for accurate calibration.
Provides a step-by-step guide for performing the calibration process for the 6244 model.
Explains the calibration procedure for voltage and current sources, referencing connection diagrams.
Details the calibration process for voltage and current measurements, referencing connection diagrams.
Instructions on how to save the calibration data to nonvolatile memory after completion.
Explains how to initialize calibration data back to default values.
Details specifications for voltage/current source ranges, resolution, and overall accuracy.
Provides specifications for voltage and current measurement ranges, resolution, and accuracy.
Details specifications for voltage/current source ranges, resolution, and overall accuracy.
Provides specifications for voltage and current measurement ranges, resolution, and accuracy.
Troubleshooting guide listing common problems and their potential causes and solutions.
Explains error numbers and messages displayed by the instrument for troubleshooting.
To Next Page
