ADCMT 6244 User Manual

6243/44 DC Voltage Current Source/Monitor Operation Manual
6.4.1 TR6143 Mode GPIB Code List
6-11
(2) Commands that cannot be used in the TR6143 mode
Table 6-5 shows the commands that cannot be used in the TR6143 mode.
Using these commands in the TR6143 mode will generate Command Execution Error.
Table 6-5 Commands that cannot be used in the TR6143 Mode
Item Unavailable commands
SOURCE Limiter polarity PL0, PL1, PL2
The limiter polarity query PL?
MEASURE
BUFFER
The measurement buffer memory storage mode SM0, SM1, SM2
The store mode query SM?
Enquiring about the amount of stored data SZ?
Clearing the memory RL
Specifying a recall number RN
Enquiring about the recall number RN?
SAVE/LOAD
Saving data STP1, STP2, STP3
Clearing User 0 to 3 SINI
Loading RCLP0, RCLP1, RCLP2, RCLP3
Initializing the load parameter RINI
GPIB
Status *STB?, *SRE, *SRE?, *ESR?, *ESE, *ESE?,
*CLS, DSR?, DSE, DSE?, ERR?
OPC *OPC, *OPC?, *WAI
TIME Source delay time SD
CALIBRATION Calibration XENT and all calibration commands

ADCMT 6244 Specifications

General

Brand	ADCMT
Model	6244
Category	Measuring Instruments
Language	English