6243/44 DC Voltage Current Source/Monitor Operation Manual
1.7 Cleaning, Storage, and Transport Methods
1-15
1.7 Cleaning, Storage, and Transport Methods
1.7.1 Cleaning
Wipe dirt off the 6243/44 with a soft cloth or small brush as needed. Clean around the keys on the front
panel with a brush. If the dirt is difficult to remove, use a soft cloth moistened with a neutral detergent
diluted with water.
NOTE:
1. Ensure that water does not penetrate the 6243/44 (wring out the cloth so it is damp and not saturated).
2. Avoid using organic solvents such as benzene, toluene, xylene, acetone, etc. They will cause deformation of
the plastic parts.
3. Avoid using cleansers.
1.7.2 Storage
Store the 6243/44 in a location where the temperature is within the range of -25ï‚°C to +70ï‚°C. If storing for
an extended period (90 days or longer), place the 6243/44 in a moisture-proof bag together with a desic-
cator. Avoid storing the 6243/44 in a location where there is a lot of dust or where it will be subjected to
direct sunlight.
1.7.3 Transport
To transport the 6243/44, use the original box that the 6243/44 came in. If the box is no longer available,
pack the 6243/44 in accordance with the following guidelines.
1. Prepare a corrugated cardboard box with dimensions that are larger than the
external dimensions of the 6243/44 by 15 cm or more to allow for shock absor-
bent material.
2. Wrap the 6243/44 with a protective sheet.
3. Line the box with shock absorbing material so that the 6243/44 is protected on
all sides by cushioning material.
4. Close the box with industrial staples or use packing tape.
When sending the 6243/44 to ADC CORPORATION for service or repairs, attach a label stating the fol-
lowing items.
• Company name and address
• Name of the person in charge
• Serial number (shown on the rear panel)
• Type of service required
To Next Page
Loading...
Need help?
General
