823xxB Series Optical Sensor Operation Manual
1.3 Standard Accessory
1-4
1.3 Standard Accessory
The standard accessories, which are included in this sensor, are shown below. If any equipment is damaged
or missing, contact an ADC CORPORATION sales representative. Quote the model name when ordering.
1.4 Option
The following options can be used to obtain the wavelength sensitivity correction data or calibration data of
the sensor. Specify the option when ordering.
• Wavelength sensitivity correction option and additional calibration wavelength option
Wavelength sensitivity correction:
The wavelength sensitivity of each sensor is measured and corrected when calibrating.
(The standard model of 82311B/82321B is corrected by using the typical value.)
Additional calibration wavelength:
The calibration is performed at other wavelengths in addition to the standard specifi-
cation. (Multiple wavelengths can be specified.)
Table 1-2 Standard Accessories
Accessory name Model name Remarks
MME-130860A For 82312B/82313B/82314B
Protective cap *1 UAD-MME064A01A-1 For 82314BW
MPX-A9245A-1 For 82321B/82322B/82323B/82324B
Operation Manual E82310B -
*1: A protective cap is attached to each sensor.
Table 1-3 Sensor Option
Sensor name
Option
Wavelength sensitivity
correction
Additional calibration wavelength
405 nm 650 nm 780 nm
82311B OPT82311B+20 OPT82311B+21 OPT82311B+22 Standard specification
82312B Standard specification Standard specification - -
82313B Standard specification OPT82313B+21 Standard specification OPT82313B+23
82321B OPT82321B+20 OPT82321B+21 OPT82321B+22 Standard specification
82322B Standard specification Standard specification - -
82323B Standard specification OPT82323B+21 Standard specification OPT82323B+23
82314B Standard specification Standard specification OPT82314B+22 OPT82314B+23
82314BW Standard specification Standard specification OPT82314BW+22 OPT82314BW+23
82324B Standard specification Standard specification OPT82324B+22 OPT82324B+23
To Next Page
Loading...
