ADCMT 823B Series - 2 How to Perform Measurements

823xxB Series Optical Sensor Operation Manual
2. HOW TO PERFORM MEASUREMENTS
2-1
2. HOW TO PERFORM MEASUREMENTS
1. Connect the sensor to the INPUT connector of the optical power meter.
2. Set a wavelength.
3. Perform zero cancel while the sensor is shaded completely.
4. Set a measurement range.
5. Read the displayed value of the optical power meter.
NOTE: For more information on how to operate the optical power meter, refer to the operation manual of the 8230,
8230E, or 8250A optical power meter.