ADCMT 823B Series - Page 39

823xxB Series Optical Sensor Operation Manual
ALPHABETICAL INDEX
I-1
[A]
Applicable Optical Power Meters ........... 1-3
[C]
Calibration .............................................. 1-7
Calibration Wavelength Selection
Function .................................................. 3-2
Checking Operations ............................... 1-5
Cleaning .................................................. 1-6
Cleaning the Incident Surface of
the Sensor ................................................ 1-6
Cleaning this Sensor ............................... 1-6
[D]
Disposal and Recycle .............................. 1-8
[G]
General Specifications ............................ 5-6
[H]
How to Connect the Instrument .............. 4-2
HOW TO PERFORM
MEASUREMENTS ................................ 2-1
How to Store and Transport .................... 1-6
[ I ]
INTRODUCTION .................................. 1-1
[M]
Measuring Instruments and
Other Equipment Required to Check the
Performance of the Optical Sensor ......... 4-1
[O]
Operating Environment ........................... 1-5
Optical Power Calibration ...................... 3-1
Optical Sensor Specifications ................. 5-1
Option ..................................................... 1-4
[P]
PERFORMANCE TEST ........................ 4-1
Precautions .............................................. 1-5
Product Outline ....................................... 1-1
[S]
SPECIFICATIONS ................................. 5-1
Standard Accessory ................................. 1-4
Storage .................................................... 1-6
[T]
TECHNICAL NOTES ............................ 3-1
Test Point and Judgment Criteria ............ 4-2
Test Procedure ........................................ 4-3
Transportation ......................................... 1-6
[W]
Warm-up ................................................. 1-7
Wavelength Sensitivity Correction ......... 3-1
ALPHABETICAL INDEX ALPHABETICAL INDEX