Seite 15
Secure the battery cable to the bicycle
frame with cable ties as shown in the
illustration, and cut off the excess ends
of the cable ties.
Tightening the battery cable
The battery cable should not shift
Repeatedly fold and unfold the bike to
check that the battery cable does not
shift and does not come into contact
with moving parts, such as the chain.
ATTENTION!
When securing the baery cable, as shown in the illustraon, crea-
te a loop to ensure that the cable does not become taut or strained
when folding.
Also check that the battery cable is not
pinched or kinked during the folding
and unfolding process.
The battery cable is not pinched or kinked
To Next Page
Loading...