Seite 19
If the tyre slips thourgh, adjust the con-
tact pressure as needed.
For A and C Line models, the contact
pressure is primarily adjusted via tyre
pressure.
Adjust the tyre pressure for A & C Line
ATTENTION!
The tyre pressure should not be lowwer or higher as permied by
the tyre producers!
For P und T Line models the contact
pressure is regulated by adjusting the
position of the drive unit along with the
mounting plate. To increase the con-
tact pressure, shift it towards the rear
wheel.
For P und T Line models tyre pressure
is NOT used to adjust the contact
pressure!
Adjust the contact pressure P & T Line
To Next Page
Loading...