ADJ Dotz Par - RGB Dimmer Mode

conrm.
NO DMX - This mode can be used as a precaution mode,
that in case the DMX signal is lost, interrupted, or power is
lost, the operating mode chosen in the setup is the running
mode the xture will go into when the DMX signal is lost. You
can also set this as the operating mode you would like the
unit to return to when power is applied.
1. Press the MENU button until “NO DMX” is displayed, and
either “Sound”, “Black”, or “Hold” will be displayed beneath.
2. Press ENTER and the bottom choice will begin to ash. Use
the UP or DOWN buttons to choose an operating mode you
would like the unit to start up in when power is applied or the
DMX signal is lost.
• Sound - If the DMX signal is lost, interrupted, the unit will auto-
matically go into sound active mode.
• Black (Blackout) - If the DMX signal is lost or interrupted, the
unit will automatically go into stand by mode.
• Hold - If the DMX signal is lost the xture will stay in the last
DMX setting. If power is applied and this mode is set, the unit will
automatically go into the last DMX set up.
3. Press ENTER to conrm your desired set up.
Slave Mode - This will let you set your unit as a slave in
a master/slave conguration.
1. Press the MODE button until “SLAU” is displayed. Your unit
will now follow the Master.
RGB Dimmer Mode - Select your desired color to
remain static or adjust the RGB colors to create your desired
Dotz Par System Menu
ADJ Products, LLC - www.adj.com - Dotz Par User Manual Page 8ADJ Products, LLC - www.adj.com - Dotz Par User Manual Page 15
When Channel 5 is being used Channels 1 - 3 will not function.
When Channel 6 is between the values of 1-100, Channel 7 will control the
program speed.
When Channel 6 is between the values of 101-140, Channel 7 will control the
sound sensitive.
Channel Value Function
5 COLOR MACROS CONT.
200 - 207 MOSS GREEN
208 - 215 PRIMARY GREEN
216 - 223 DOUBLE CTB
224 - 231 FULL RED
232 - 239 FULL GREEN
240 - 247 FULL BLUE
248 - 255 WHITE
6 PROGRAMS
0 OFF
1 - 20 COLOR FADE/CHANGE
21 - 40 7 COLOR CHANGE
41 - 60 7 COLOR FADE
61 - 80 3 COLOR CHANGE
81 - 100 3 COLOR FADE
101 - 120 SOUND ACTIVE COLOR FADE
121 - 140 SOUND ACTIVE COLOR CHANGE
141 - 255 NOTHING
7 PROGRAM SPEED/SOUND SENSITIVE
0 - 255 PROGRAM SPEED SLOW - FAST
0 - 255 LEAST SENSITIVE - MOST SENSITIVE
8 0 - 255 STROBING SLOW - FAST
9 DIMMER CURVES
0 - 41 STANDARD
42 - 84 STAGE
85 - 127 TV
128 - 170 ARCHITECTURAL
171 - 213 THEATRE
214 - 255 DEFAULT TO UNIT CURVE SETTING
Dotz Par 9 Channel Mode