ADJ StarTec Series - Specifications

Starbar Wash Specifications
Model:
Starbar Wash
Voltage: 100V ~ 240V/50~60Hz
LEDs: 12 x 12W 6-in-1 HEX LED’s
Power Draw: 133W
Weight: 20 lbs. / 9 Kgs.
Unit With Stand: 17 lbs. / 7.7 Kgs.
Par: 1.2 lbs. / 0.5 Kgs
Foot Controller: 2 lbs. / 0.9 Kgs.
Bag: 1 lbs. / 0.4 Kgs.
Stand Max. Load: 55 lbs. / 25Kgs.
Dimensions: 37” (L) x 2” (W) x 11” (H)
939.8 x 50.8 x 279.4mm
Stand Height w/o Bar: 45.25” / 1150m (Minimum Height)
73.6” / 1870m (Maximum Height)
Open Leg Diameter: 40” / 1m
Par: 6.5” (L) x 1.6” (W) x 6.9” (H)
166 x 40 x 175mm
Foot Controller: 6.8” (L) x 4.68” (W) x 1.65” (H)
172.5 x 119 x 42mm
32ft. (Cable Length)
Colors: RGBW Color Mixing
DMX Channels: 5 DMX Modes: 4 Channel Mode, 5 Channel Mode,
6 Channel Mode, 17 Channel Mode, &
19 Channel Mode
Warranty: 1 Year (365 Days)
Please Note: Specications and improvements in the design of this unit and
this manual are subject to change without any prior written notice.
ADJ Products, LLC - www.adj.com - Starbar Wash User Manual Page 30