ADMET eP2 - Controller Menu System Overview; Test Method Specific Menu Selections

51 Morgan Drive Norwood, MA 02062 11
Tel: (781) 769-0850 Fax: (781) 769-0884
Sales@ADMET.com www.ADMET.com R7 10/2018
eP2 Controller
Operators Manual
4.0. The Menus and Keys
4.0.1 Test Method Specific Menu Selections
The eP2 Controller can store up to six test methods.
These menu items apply to the current selected test method and need to be set for each test method being used.
Data Acq
Up, Down Arrows to scroll
through menu:
1)
Threshold
2)
Sample Break
3)
Specimen Type
4)
Log Rate
5)
Local Overload
6)
Engineering Units
Control
Up, Down Arrows to scroll through menu:
1)
Test Profile
SegA (in/min)
End CH SegA
End AmtA
Create SegB? (Yes/No)
SegB (in/min)
End CH SegB
End AmtB
1) Cycle Btwn Seg (On/Off)
2)
Post Test (Home/Stop)
3)
Jog Rate
4)
Home Location
5)
6)
Pre Load
7)
8)
ID#
1)
Specimen ID#
Analysis
Up, Down Arrows to scroll
through menu:
1)
Select Analysis
2)
Set Limits
3)
Calculate Results
4)
Send XY Data
5)
Send Current Result
1-6)
Test Method
Select Test Method
Set ABS Zero
7)
Home Rate
Pre Rate
Control Gains
Dir (Tension/Compression)
7)
8)
Freeze Strain
*Optional Feature