51 Morgan Drive Norwood, MA 02062 5
Tel: (781) 769-0850 Fax: (781) 769-0884
Sales@ADMET.com www.ADMET.com R7 10/2018
Forward
ADMET's eP 2 CONTROLLER has been designed and constructed with great care in every phase of assembly. In order to insure
reliability, both the mechanical and electrical components have been built with the best available materials. Nevertheless, it has
been proven that a thorough understanding of the machine, together with proper attention, will pay big dividends. The sections of
this manual provide description and instruction on the operation and maintenance of the mechanical, electrical and software
components.
You as a customer are our most valued asset. We take pride in our systems and are proud that you have become an owner. We
welcome your comments about our products and wish that you express them. It is the only way that we can continue to build the
best available test systems to satisfy your needs. Thank-you for your support.
HOW TO USE THIS MANUAL
This manual is intended to instruct you on the capabilities, operation and maintenance of the eP 2 CONTROLLER. In addition, it is
to be used as a supplement for any information supplied by the load frame manufacturer. Maintenance procedures specified by
the load frame manufacturer should be followed unless specifically noted herein. Read this manual and become familiar with the
operation of your test machine prior to operating the eP 2 CONTROLLER.
TECHNICAL SUPPORT
If a problem should occur with your testing machine:
1) Check that all external inputs are properly connected.
2) Call the supplier/manufacturer of your test machine.
3) Call ADMET's technical support at (781) 769-0850 x31 (9AM to 5PM EST).
To Next Page
Loading...
Need help?
General