Need help?Do you have a question about the ADMET eP2 and is the answer not in the manual?
Introductory remarks about the eP2 Controller and customer appreciation.
Guidance on using the manual for operation and maintenance of the eP2 Controller.
Contact details and steps for resolving issues with the testing machine.
Overview of the eP2 Controller's microprocessor, A/D converter, and control algorithms.
Step-by-step guide for setting up, running, and storing test results using the eP2 controller.
Detailed illustration and description of the eP2 Controller's front panel buttons and display.
Explanation of the LCD display modes, calibration table, test method selection, and status codes.
Comprehensive explanation of each key's function on the eP2 Controller's front panel.
Details on configuring test-specific parameters within menus like Data Acq, Control, Analysis, and ID#.
Overview of global settings available through UTILS, PRINT, Store, and Zero menus.
How the controller automatically identifies and loads calibration data for connected transducers.
Step-by-step instructions for multipoint and two-point shunt calibration of analog transducers.
Explanation of calibration point entry, scale factor calculation, and verification.
Methods for saving calibration data and transferring it to GaugeSafe software.
Procedure for setting the gage length for an adjustable extensometer via the Utils menu.
Common issues with analysis results and test ending early, with possible causes and solutions.
Troubleshooting for machine movement at requested rate, not moving, or moving in wrong direction.
Specifications for the physical size and dimensions of the eP2 Controller.
Pin designation details for analog load and strain transducer inputs.
Pinouts for encoder-position input and servo box connections.
Details on the I/O port, system enable, and other interface connections.
General| Model | eP2 |
|---|---|
| Type | Controller |
| Communication Interface | Ethernet |
| Sampling Rate | 1 kHz |
| Control Modes | Force, Position, Strain |
To Next Page