ADT MDC845 User Manual

ADT MDC845 FHD Wi-Fi Mini Dome Camera
Quick Installation Guide
MDC845 FHD Wi-Fi Mini Dome Camera Installation Guide
10
• Follow the on-screen instructions to finish adding the camera.
3.2 Using Soft AP to Enroll Camera
• Set up the camera as described in the previous section.
- Connect the camera’s AC power adapter and plug it into a power
outlet.
- Wait for the power LED to blink green/amber.
• Connect to the camera’s network SSID using a laptop or mobile device.
The SSID is the model number of the camera and part of the MAC
address. (for example, SSID = MDC845 (XX:XX:XX)).
• Open a web browser (Internet Explorer, Chrome, Firefox, etc.). Enter
adt1.com and you are directed to the install wizard page.
• Choose a language.
• Click Scan for Wi-Fi Networks and select the customer’s router SSID.
Note: Control cameras connect to the
customer’s Wi-Fi network to access the
Internet and be added to the Control
platform. It is imperative that the customer
understand that all camera locations are

ADT MDC845 Specifications

General

Brand	ADT
Model	MDC845
Category	Security Camera
Language	English