ADT MDC845 User Manual

ADT MDC845 FHD Wi-Fi Mini Dome Camera
Quick Installation Guide
MDC845 FHD Wi-Fi Mini Dome Camera Installation Guide
9
3 ADT Control Enrollment
This section provides examples of two different methods for enrolling the
MDC845 FHD Wi-Fi Mini Dome Camera onto the ADT Control platform. The first
method uses a wired connection while the second method uses the Soft AP to
wirelessly connect the FHD camera to the customer’s network.
3.1 Using a Wired Connection to Enroll the Camera
• Set up the camera as described in the previous section.
- Ensure the Ethernet cable is plugged into the customer’s router.
- Connect the camera’s power adapter and plug it into a power outlet.
- Wait for the power LED to become solid green.
• Connect a laptop or mobile device to the customer’s network and then log in
to the Control web portal,
https://www.adt.com/control-login, to complete the
setup.
• Select Video from the menu list.
• Click Settings and then select Add Video Device.
• Select Install from the video device list to begin adding the camera. If a
laptop or mobile device are not on the customer’s network, then enter the
MAC address of the camera.

ADT MDC845 Specifications

General

Brand	ADT
Model	MDC845
Category	Security Camera
Language	English