ADT MDC845 FHD Wi-Fi Mini Dome Camera
Quick Installation Guide
MDC845 FHD Wi-Fi Mini Dome Camera Installation Guide
5 Ceiling Mounting
This section provides details for final mounting of the MDC845 FHD Wi-Fi
Mini Dome Camera. You should ensure that the camera is configured and
enrolled in the platform before permanently mounting it.
• Locate an unused, non-switchable, indoor outlet to plug the AC/DC power
adapter into. This outlet should be located as close as possible to the
location where the camera will be permanently mounted.
Caution: Do not plug in the power adapter until all the connections
are completed and the camera is fully mounted.
• Identify the location where you would like to mount the camera. Using the
mounting template included in the box as a guide, drill three mounting
holes into the ceiling.
• If you have not done so already, use the L tool to remove the three screws
and the bubble from the camera.
• If using the anchors, insert them into the mounting holes.
• Align the three mounting holes of the camera stand with the three drilled
holes, and then mount the camera stand onto the ceiling using the
provided screws.
Note: It is recommended that you route the cable through the side opening of
the mounting base.
• Make the camera angle adjustments. The camera offers 3 axis adjustments:
To Next Page
Loading...
Need help?
General
