ADT MDC845 FHD Wi-Fi Mini Dome Camera
Quick Installation Guide
MDC845 FHD Wi-Fi Mini Dome Camera Installation Guide
4 ADT Pulse Enrollment
This section provides examples of two different methods for enrolling the
MDC845 FHD Wi-Fi Mini Dome Camera onto the ADT Pulse network. The first
method uses a wired connection while the second method uses the Wi-Fi
Protected Setup (WPS) with PIN method to wirelessly enroll the FHD camera
to the gateway with the ADT Pulse Portal or TS Installer App.
4.1 Using a Wired Connection to Enroll Camera
Note: This method is not supported by Cloud Link, as that device does not
have a Device LAN port for making the wired connection
• Set up the camera as described in “Section 2: Basic Setup”.
- Ensure the ethernet cable is plugged into the Pulse gateway.
- Connect the camera’s power adapter and plug it into a power outlet.
- Wait for the power LED to become solid green.
• Launch an Internet browser and log in to the Pulse portal or TS Installer app.
• Enter the Manage Devices screen using one of these methods:
- For Pulse portal, select the System Tab and click Manage Devices.
- For TS Installer app, click the Pulse Devices link. The Manage
Devices screen appears.
• In the Manage Devices screen, click Cameras.
• Click the Add button located at the bottom of the screen.
To Next Page
Loading...
Need help?
General
