To Next Page

To Previous Page

RC8025B-ADT Wireless Day/Night Camera Installation Guide

6. Connect the power cable into the back of the camera and plug the adapter

end into a power outlet.

NOTE:

Use only the power adapter provided. Using a different one may

lead to hardware damage.

7. Adjust the wireless camera to a desired orientation based on the video

image on the touch panel, and secure the camera firmly.

12 ADT Pulse

Interactive Solutions

Questions and Answers:

Need help?

Do you have a question about the ADT RC8025B-ADT and is the answer not in the manual?

ADT RC8025B-ADT Specifications

General