Introduction
This installation guide provides step-by-step instructions for configuring and
installing your RC8025B-ADT Wireless Day/Night Camera to your ADT Pulse
®
wireless network. Permanent mounting instructions for the Wireless Camera
are also included.
Overview
The RC8025B-ADT Wireless Day/Night Camera (hereafter referred to as the
wireless camera) has an Integrated Microcomputer and a high quality digital
Image Sensor, enabling it to display high quality, live streaming video to your
web or mobile client over an 802.11n Wireless LAN.
RC8025B-ADT Features
• Standalone Design: The wireless camera is a standalone device that
requires a power source and a wireless connection to the ADT Pulse
gateway.
• Triple Video Support: The wireless camera supports H.264 Baseline,
MPEG-4 SP and MJPEG video compression.
• Day/Night Switch: With the automatic day/night switching feature, the
wireless camera is able to view and record crisper images in the dark within
a 5-meter area.
• Standard Compliance: The wireless camera complies with the
IEEE802.11n (DSSS) specifications for Wireless LANs.
• Supports 802.11n Wireless Stations: The 802.11n Draft standard
provides for backward compatibility with the 802.11g wireless network.
• Security Support: Full WEP (64/128 Bit), WPA and WPA2 Personal
standards are supported on the Wireless interface allowing advanced
encryption of wireless data.
ADT Pulse
®
Interactive Solutions 1
To Next Page
Loading...
