ADTECH9 Series CNC Programming Manual
4.11.1. Cancel the synchronization of all axis or switch function (M10002)
Execute this M order to restore the default synchronization of all axes
4.11.2. Process after switching Axis X to Axis A (M10003)
Execute this M order to switch the Axis X to Axis A for pulse port output
4.11.3. Process Axis X and Axis A synchronously (M10004)
Execute this M order to output the pulse of Axis X and Axis A at the X position synchronously
4.11.4. Process after switching Axis Y to Axis A (M10005)
Execute this M order to switch the Axis Y to Axis A for pulse port output
4.11.5. Process Axis Y and Axis A synchronously (M10006)
Execute this M order to output the pulse of Axis Y and Axis A at the Y position synchronously
4.11.6. Process after switching Axis Z to Axis A (M10000)
Execute this M order to switch the Axis Z to Axis A for pulse port output
4.11.7. Process Axis Z and Axis A synchronously (M10001)
Execute this M order to output the pulse of Axis Z and Axis A at the Z position synchronously
4.11.8. Process after switching Axis X to Axis B (M10007)
Execute this M order to switch the Axis X to Axis B for pulse port output
4.11.9. M10008 Process Axis X and Axis B synchronously (M10008)
Execute this M order to output the pulse of Axis X and Axis B at the X position synchronously
4.11.10. Process after switching Axis X to Axis C (M10009)
Execute this M order to switch the Axis X to Axis C for pulse port output
4.11.11. Process Axis X and Axis C synchronously (M10010)
Execute this M order to output the pulse of Axis X and Axis C at the X position synchronously
4.11.12. Process after switching Axis Y to Axis B (M10011)
Execute this M order to switch the Axis Y to Axis B for pulse port output
4.11.13. Process Axis Y and Axis B synchronously (M10012)
Execute this M order to output the pulse of Axis Y and Axis B at the Y position synchronously
4.11.14. Process after switching Axis Y to Axis C (M10013)
Execute this M order to switch the Axis Y to Axis C for pulse port output
4.11.15. M10014 Process Axis Y and Axis C synchronously (M10014)
Execute this M order to output the pulse of Axis Y and Axis C at the Y position synchronously
To Next Page
Loading...
