Adtech ADTECH9 Series - Page 139

ADTECH9 Series CNC Programming Manual
F Oblong hole (G154)
G 0.0
H 0,0
F Space X between the hole centers (O)
G 0.0
H -9999,9999
F Space Y between the hole centers (O)
G 0.0
H -9999,9999
F Space Z between the hole centers (O)
G 0.0
H -9999,9999
F Space A between the hole centers (O)
G 0.0
H -9999,9999
F Arc radius (R1)
G 0.0
H 0,9999
F Arc radius (R)
G 0.0
H 0,9999
F Arc radius (R3)
G 0.0
H 0,9999
F Arc radius (R4)
G 0.0
H 0,9999
F Length of one side (L1)
G 0.0
H 0,9999
F Length of one side (L2)
G 0.0
H 0,9999
F Length of one side (L3)