Adtech CNC9960 - Page 133

ADTECH9 Series CNC Maintenance Manual
- 128 -
Note : To set the straight line edge value or arc radius value at the intersection of
two straight lines
069 Tool setting way of coordinate system
Range : 0~1
Unit :
Authority : Operation admin
Default : 0
Effective time : Instant
Note : To set the absolute input or relative input by manually entering the G5x
workpiece coordinate system.
070 Maximum deviation of double drive zero return-to-zero (mm)
Range : 0.1~10000
Unit :
Authority : Operation admin
Default : 1.000
Effective time : Instant
Note : To set the machine of double-drive gantry structure (the maximum
deviation of the two servo return-to-zero synchronization error alarm)
071 G code loading boundary scan enable
Range : OFF ON
Unit :
Authority : Operation admin
Default : OFF
Effective time : Instant
Note : To set whether the machining path stroke exceeds the software limit
setting value during the G code loading process.
072 Split cycle
Range :
Unit :
Authority : Operation admin
Default : 1 ms
Effective time : Instant