Adtech CNC9960 - Page 132

ADTECH9 Series CNC Maintenance Manual
- 127 -
Effective time : Instant
Note : Used to set the maximum acceleration of handwheel (valid when P1.062
is set to 1).
065 Enables for returning to reference point after machining
Range : OFF Absolute coordinates, Machine coordinates
Unit :
Authority : Operation admin
Default : OFF
Effective time : Instant
Note : To set the system to return to the G54 workpiece coordinate system zero
point or machine coordinate system zero point after machining program
operation completes
066 Feeding rate variation
Range : 1~100
Unit :
Authority : Operation admin
Default : OFF
Effective time : Instant
Note : To set the adjusting unit amount of feedrate
067 Auto chamfering and arc chamfering enable
Range : OFF Auto chamfering , Auto arc chamfering, Arc chamfering error
Unit :
Authority : Operation admin
Default : OFF
Effective time : Instant
Note : To set the straight lines or arc chamfering transition at the intersection of
two straight lines
068 Chamfering or arc chamfering accuracy (mm)
Range : 0~100
Unit :
Authority : Operation admin
Default : 1.000
Effective time : Instant