uic
Start
Figure 1. 622v ONT
DESCRIPTION
The 622v XGS-PON ONT is a Single Family Unit (SFU) Optical
Network Terminal (ONT) that leverages XGS-PON technology for
delivering premium 10 Gbps Ethernet services.
The 622v ONT is an indoor unit that supports up to 10 Gbps data
rates and voice.
This document supports the following versions of the 622v ONT:
Figure 1 illustrates the front LED display.
FEATURES
The basic features of the 622v ONT include the following:
■ 10 Gbps XGS-PON SC/APC connector (WAN)
■ Customer Interfaces
♦ 10 Gbps Ethernet interface
♦ 1 Gbps Ethernet Interface
Description P/N
622v XGS-PON ONT with NA power adapter
(included)
1287843F1
622v XGS-PON ONT with UK power adapter
(included)
1287843F2
622v XGS-PON ONT with EU power adapter
(included)
1287843F3
622v XGS-PON ONT with AUS/NZ power
adapter (included)
1287843F4
♦ Two POTS (RJ-11) Interfaces
■ Remote activation and deactivation
■ Remote firmware upgrades and downgrades
■ Remote OMCI management as per ITU-T G.988
Refer to the following table for a description of each feature in
Figure 2.
Figure 2. ONT Interfaces
POWER
Power is provided by a 12 V DC Power Adapter that is included
with the 622v ONT. The power adapter operates from a power
Callout Description
1LEDs
2 10 Gbps XGS-PON SC/APC connector (WAN)
3 Two POTS (Phone) Ports
4 10 Gbps Ethernet interface
5 1 Gbps Ethernet interface
6 Reset Button
7 Power Connection for the Supplied AC to DC Power Con-
verter (12 V)
8 On/Off Button
ON/OFFPowerRESET10GE
GE10GE2
1
GEOptical POTS2 POTS1
8
1
4
2
3
5
6
7
SDX
622v XGS-PON ONT
2 POTS/ 10GE/ 1GE SFU
September 2020
61287843F1-13B