Do you have a question about the ADTRAN SDX 611 GPON SFU ONT and is the answer not in the manual?
input voltage | 12 V DC |
---|---|
input current | 0.5 A |
maximum power consumption | 6 W |
input voltage rating | 100 - 240 V AC, 50/60 Hz |
---|---|
output voltage rating | 12 V DC |
output current rating | 0.5 A |
operational temperature range | 0°C to +40°C |
---|---|
storage temperature range | –40°C to +70°C |
relative humidity | up to 95%, noncondensing |
TX min power | +0.5 dBm |
---|---|
TX max power | +5.0 dBm |
RSSI max sensitivity | –27.0 dBm |
RX overload | –8.0 dBm |
TX wavelength | 1310 nm typical |
RX wavelength | 1490 nm typical |
height | 2.40 cm |
---|---|
width | 8.00 cm |
depth | 8.00 cm |
weight | 0.09 kg |
Highlights key capabilities including GPON interface, Ethernet port, remote management, and firmware upgrades.
Details the physical interfaces of the ONT, including LEDs, GPON port, LAN port, and power connector.
Provides a summary of the ONT's function and lists supported regional power adapter versions.
Covers essential warnings, setup overview, required tools, and fiber cleaning for installation.
Describes the two primary installation methods: desktop placement and wall mounting procedures.
Encompasses electrical, physical, environmental, and optical characteristics of the ONT.
States that no routine hardware maintenance is required for normal operation.
Refers to external safety notices and provides contact information for customer care.