Need help?Do you have a question about the Advanced Electronics Mx-4200/D and is the answer not in the manual?
Highlights critical safety precautions and warnings before installation and operation to prevent hazards.
Step-by-step guide for installing the Mx-4100 enclosure, including cover, chassis handling, and cable routing.
Instructions for installing Mx-4200 and Mx-4400 enclosures, covering cover, chassis removal, and mounting procedures.
Details installation for Mx-4400/LE and Mx-4800 enclosures, including chassis removal, mounting, and cable routing.
Explains fitting and removing loop driver cards in Mx4200, Mx4400, and Mx4800 panels for loop expansion.
Details AC Mains wiring, battery installation, and various circuit connections for system setup and operation.
Outlines a step-by-step procedure for configuring panel functions, from setup to zone programming.
Details the various functions available within the Level 3 programming menu, including Loops, Zones, Outputs, and system setup.
General| Operating Voltage | 24 VDC |
|---|---|
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Display Type | LCD |
| Communication Ports | RS-232, RS-485, Ethernet |
To Next Page
