Table of Contents
1 INTRODUCTION 6
1.1 STANDARDS 6
1.2 CAUTIONS AND WARNINGS 7
1.3 DESCRIPTION 7
1.4 EN54 FUNCTIONS 8
1.5 EN54 OPTIONAL FEATURES WITH REQUIREMENTS 9
1.6 INSTALLATION APPROVALS 10
1.6.1 Fire System Installations 10
1.6.2 Wiring Regulations 10
2 INSTALLATION 11
2.1 IDENTIFICATION OF PARTS 11
2.1.1 Mx-4100 11
2.1.2 Mx-4200 & Mx-4400 11
2.1.3 Mx-4400/LE 12
2.1.4 Mx-4800 12
2.2 INSTALLING THE MX-4100 ENCLOSURE 13
2.2.1 Removing and Replacing the Enclosure Cover of the Mx-4100 13
2.2.2 Removing the Chassis 13
2.2.3 Mounting the Enclosure 13
2.2.4 Remounting the Chassis 13
2.2.5 Recommended Cable Routing Arrangement 14
2.3 INSTALLING THE MX-4200 & 4400 ENCLOSURES 14
2.3.1 Opening the Enclosure Cover 14
2.3.2 Removing the Chassis 14
2.3.3 Mounting the Enclosure 15
2.3.4 Remounting the Chassis 15
2.3.5 Recommended Cable Routing Arrangement 15
2.4 INSTALLING THE MX-4400/LE AND MX-4800 ENCLOSURES 16
2.4.1 Opening the Enclosure Cover 16
2.4.2 Removing the Chassis 16
2.4.3 Mounting the Enclosure 16
2.4.4 Remounting the Chassis 17
2.4.5 Recommended Cable Routing Arrangement 17
2.5 LOOP DRIVER INSTALLATION 18
2.5.1 Fitting the cards in the Mx4200, Mx-4400 & Mx-4800 18
2.5.2 Removing a Loop Driver Card 18
2.6 LOCAL PERIPHERAL MODULES 19
2.6.1 Peripheral Bus Interface Adaptor 19
2.6.2 Routing Interface Card 19
2.7 WIRING INSTALLATION 20
2.7.1 AC Mains Wiring 20
2.7.1.1 Cable Gland 21
2.7.2 Battery Installation 21
2.7.2.1 Mx-4100 22
2.7.2.2 Mx-4200 & Mx-4400 22
2.7.2.3 Mx-4400/LE & Mx-4800 23
2.7.2.4 Battery Temperature Monitoring 23
2.7.3 Detector Loop Installation 24
2.7.4 Sounder Circuits 25
2.7.5 Relay Circuits 25
2.7.6 Open Collector Outputs 26
2.7.7 Auxiliary Supply Output 26
2.7.8 Switch Inputs 26
2.7.9 RS232 Interface 27
2.7.10 Isolated Bus Interface 27
2.7.11 Routing Interface 27
3 PROGRAMMING 28
3.1 INTRODUCTION 28
3.1.1 Access Levels 28
To Next Page
Loading...
